Click image to view full size image
Metal panel American 1 gang 2 way switch the overall appearance is gray, with a metallic texture, elegant atmosphere, highlighting the taste, and supporting the use of fluorescent strips, which can be used normally in a dark environment.
USA Switch Product Parameters
Product Name |
Metal panel American 1 gang 2 way switch |
Type |
American Standard |
Series |
SA2 |
Place Of Origin |
Zhejiang, China |
Rated Current |
16A |
Rated Voltage |
250V |
Mechanical Life |
40000 times |
Size |
120×75mm |
Material |
PC+Phosphor Copper |
Use Occasion |
Residential, Commercial, General Use |
Warranty |
15 years |
OEM |
Yes |
Delivery Date |
Negotiable |
Installation Suggestions
1. The installation height of the switch is 1.4m from the ground and 0.2m from the door. The installation height of the socket depends on the use environment. The customer: 30cm from the ground, 14m from the kitchen, and 18m from the ground.
2. The distance between the power cord and the socket should not be less than 50cm
3. When installing the electrical socket, face the neutral wire (N) on the left side of the socket, the live wire (L) on the right side, and the protective earth wire (PE) on the top of the middle.
4. For household power sockets, it is recommended to use products with protective doors to protect the lives of family members, especially children. The switch or socket installed in the bathroom and open balcony should be equipped with a corresponding water box.
5. The switch that controls the lamps in the bathroom is best installed outside the bathroom door to prevent water vapor from entering the switch, affecting the life of the switch or causing an accident. Install the socket next to the bedroom, and avoid blockage by pit cabinets or bed boards.
Logistics Transportation
http://www.zjtot.com/